Home » KVM Extenders » 100m USB 3.2&3.0 Extender

100m USB 3.2&3.0 Extender

Model No.: KEU200

Data transmission rate: up to 5Gbit/s.
Two-way PoH+function: one power supply for making transmitter and receiver powered on.
Hot pluggable and compatible with multiple operating systems.
Pure hardware architecture: compatible with Control/Bulk/Interrupt/Isochronous transmission protocols.
Built-in 4-port USB hub in the receiver: compatible with multiple USB devices (USB3.2/USB3.0).

Get A Free Quote

Features

Diagram

Specification

Accessory

Download

Overview

This product is a new generation of USB 3.2 & USB 3.0 extender. It supports USB 3.2 Gen 1 standard with up to 5Gbit/s USB data transmission rate, and is backward compatible with USB 3.0, USB 2.0 and USB1.1 specifications.

This USB extender can extend the USB 3.2 & USB 3.0 data up to 100m/330ft via a single Cat 6a/7 F/FTP or U/FTP cable. It has a built-in 4-port USB hub in the receiver, which can be connected with multiple USB devices. Pure hardware architecture is compatible with Control / Bulk / Interrupt / Isochronous transmission protocols. For multiple USB device scenarios, this extender can also be used with an external USB 3.2 & 3.0 hub.

With two-way PoH + function, the extender can only need one power supply to be connected to the transmitter or receiver to power both units, which is especially suitable for scenarios where the receiver can’t be connected to a power supply (such as in outdoor monitoring scenario).

Wide Compatibility

KEU200 is compatible with multiple operating systems.

Wide Compatibility

KEU200 is compatible with multiple operating systems.

Transmission Rate

KEU200 can support transmission rate up to 100m/330ft.

Transmission Rate

KEU200 can support transmission rate up to 100m/330ft.

RS232 & FSYNC GPIO

It supports RS232 and FSYNC GPIO pass-through for industrial camera control.

RS232 & FSYNC GPIO

It supports RS232 and FSYNC GPIO pass-through for industrial camera control.

Built-in PoH+ module

One power adapter can be used to make transmitter and receiver powered on.

Built-in PoH+ module

One power adapter can be used to make transmitter and receiver powered on.

Diagram

Specification

Technical
Input/Output Port	Transmitter	1 x USB HOST (USB Type-B)
		1 x RS232 & FSYNC (3.5mm, 4-Pin Phoenix Connector)
		1 X USB3-LINK (RJ45)
		1 x POWER
		1 x FW (Micro-USB)
	Receiver	4 x USB DEVICE (USB Type-A)
		1 x RS232 & FSYNC (3.5mm, 4-Pin Phoenix Connector)
		1 X USB3-LINK (RJ45)
		1 x POWER
		1 x FW (Micro-USB)
USB Standard	USB 3.2 Gen1, and backward compatible with USB 3.0, USB 2.0, and USB 1.1 standards
Data Rate	Up to 5Gbit/s
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90%, non-condensing
ESD Protection	Human-body Model:±8kV (Air-gap discharge)/±4kV (Contact discharge)
Power Supply	20V/3A
Power Consumption (Max)	31.28W (Pair, USB fully loaded)
Device Dimension(W x H x D)	Transmitter/Receiver: 150mm x 20.5mm x 100mm / 5.9” x 0.81” x 3.94”
Product Weight	Transmitter: 0.35kg/0.77lb, Receiver: 0.34kg/0.75lb